Home | Rooftite | Tiletite | Trap Primer | Wastes | Water Hammer | Other | Dealers Only | Contact Us
Multi-fit Wastes
32mm (11/4") and 40mm (13/4")
The PLUMBERSMATES Multi-fit Waste can be used to replace three other versions of standard waste fitting. It can be used as a short tail, longtail or overflow waste. It will never lose it's stainless steel finish and comes complete with a seal kit which ensures no clean up is required to remove excess sealant. Installation is incredibly simple and fast!
The Multi-fit Waste is also particularly suitable for highly corrosive areas such as laboratories and harsh industrial applications as well as in low temperature zones where brass wastes are prone to freezing up.
The Plumbersmates waste is an extremely cost effective alternative to normal brass wastes.
Removable Grate Wastes
32mm (11/4") and 40mm (13/4")
The PLUMBERSMATES Removable Grate Waste has been designed to enable easy cleaning and when necessary, clearing of the waste and trap below without the need to disconnect any pipework. (NB: The entire stainless steel grate is removable - not just the internal base). For cleaning or clearing, the homeowner or service person simply rotates the Patented Stainless Steel Grate anti clockwise 30 Degrees until it becomes free of the housing and then lifts clear. This process can be used as many times as required.
Our Removable Grate Waste is manufactured very cost effectively by using stainless steel and plastic in appropriate areas. These materials will not crack; flake or peel ,like many chrome-plated wastes do. This product will withstand harsh commercial and industrial sink applications. It also has excellent chemical resistant properties for installation in laboratories, wineries and other highly corrosive environments.
Plumbersmates has a full range of Waste plugs to compliment both
the Multi-fit and Removable Grate range of wastes.
Home | Rooftite | Tiletite | Trap Primer | Wastes | Water Hammer | Other | Dealers Only | Contact Us