Home | Rooftite | Tiletite | Trap Primer | Wastes | Water Hammer | Other | Dealers Only | Contact Us

Rooftite Pipe Flashing

EPDM and Silicon flashings for pipes from 0 - 375mm (0 - 14 3/4")
for simple sealing through all metal roofing

 
SILICONE - RED
The silicone range is designed for high temperature applications
up to 200 Degrees C.
Our Rooftite's patented Oval base provides many features for both the wholesaler and the installer. Some of these features are: greater coverage on steep pitched roofs (mirroring the hole cut), a reduction in stock required (due to a larger range of pipe sizes covered by each flashing) while also providing adavatages.

Particular attention has also been given to key areas which include: easy selection of the correct size flashing: extra flexibility on steep pitch roofs: a base surface which improves the seal between the roof and the flashing: and an exceptional seal between the pipe and the flashing.
UNIQUE OVAL SHAPE BASE
INTERNAL MOULDED O-RINGS
BETTER SIZING
Rooftite has been designed to mirror the oval hole-cut in the roof for pipe penetrations. This is especially valuable on steep, pitched roofs up to 45 degrees.
This oval also reduces the flashing width, giving less restriction and allowing for better waterflow down the roof.
The Rooftites internally moulded
O-rings allow for a dramatically improved seal around the pipe, as well as giving greater strength at the point where it is most needed.
Patent Pending.
Each flashing is able to accomodate a greater range of pipe diametres, with the most commonly used diameters falling midway between within flashing sizes.
TWIN PLEATS
CUSTOM MOULDED BASE RIBS
STANDARD EPMD
The deign of twin pleats halves the stress of the Rooftite, especially in the direction of movement. They also give greater flexibility and deformation on steep pitched roofs. Patent Pending.
Custom moulded base ribs of a triangular design allow for easier deformation. these base ribs, together with the outer flange seal, provide an excellent seal between roof and flashing. Patent Pending.
COLOUR - GREY
The Rooftite's standard grey colour is aesthetically pleasing and blends well with most roof and pipe colours.
TILETITE SIZES 0 - 35mm 0-70mm 50 - 155mm 150 - 255mm 240 - 375mm
ROOF PITCH (Degrees) 0 - 45 0 - 45 0 - 45 0 - 45 0 - 45
Home | Rooftite | Tiletite | Trap Primer | Wastes | Water Hammer | Other | Dealers Only | Contact Us